We use cookies to make your experience better.
To comply with the new e-Privacy directive, you agree to the privacy policy and our use of cookies.
ARCTIC P8 PWM PST - Pressure-optimised 80 mm Fan with PWM PST
SKU
ACFAN00150A
Category: Computer Cooling Components
| Suitable for | Computer case |
|---|---|
| Type | Fan |
| SKU | ACFAN00150A |
| EAN | 4895213702034 |
| Manufacturer | ARCTIC |
| Availability | Y |
Optimised for Static Pressure
During the development of the new P8 PWM PST, special emphasis was placed on a focused airstream and thus a high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the P8 PWM PST is particularly suitable for use on heatsinks and radiators.
Maximum Quietness, Minimum Vibration
Even at low speeds the operating sound of the new ARCTIC motor is barely noticeable.
Due to a sinus-magnetizing the new motor only creates about 5 % of the vibration from commutation of a regular DC-motor without filter. Consequently, there is no need for rubber spacers due to the steady and smooth torque of the new motor.
Extended Life Span
A 10 °C lower motor temperature roughly doubles the life span of a fan.
The new ARCTIC motor has a four times longer service life through its low coil temperature.
Consequently, we have extended the warranty to 10 years.
200 to 3000 RPM regulated via PWM PST
Thanks to the 4-pin connector, the RPM can be regulated in a broad spectrum via PWM.
In this way, noise is kept at a minimum while maximum cooling performance is guaranteed when needed.
High Quality Bearing
Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan.
Two Way Installation
Push warm air out of the case
Pull cool air into your case
Not only that we at ARCTIC free the IT world from noise – we care for the right sound as well!
As an international company, our expertise extends over noise reduction in PCs to consumer electronics products.
As an international company, our expertise extends over noise reduction in PCs to consumer electronics products.
| Performance | |
|---|---|
| Suitable location | Computer case |
| Fan connector | 4-pin |
| Pulse-width modulation (PWM) support | Yes |
| Rotational speed (min) | 200 RPM |
| Rotational speed (max) | 3000 RPM |
| Noise level | 0.3 sone |
| Bearing type | Fluid Dynamic Bearing (FDB) |
| Type | Fan |
| Fan diameter | 8 cm |
| Supported processor sockets | Not supported |
| Compatible processor series | Not supported |
| Maximum airflow | 23.4 cfm |
| Maximum air pressure | 1.9 mmH2O |
| Airflow | 40.3 m³/h |
| Number of fans | 1 fan(s) |
| Mounting hole pattern (W x D) | 71.5 x 71.5 mm |
| Number of fan blades | 5 |
| Design | |
| Fan connector | 4-pin |
| Number of fans | 1 fan(s) |
| Product colour | Black |
| Cable length | 0.4 m |
| Number of fan blades | 5 |
| Technical details | |
| Type | Fan |
| Fan diameter | 8 cm |
| Supported processor sockets | Not supported |
| Compatible processor series | Not supported |
| Maximum airflow | 23.4 cfm |
| Maximum air pressure | 1.9 mmH2O |
| Airflow | 40.3 m³/h |
| Number of fans | 1 fan(s) |
| Cable length | 0.4 m |
| Fan connector | 4-pin |
| Mounting hole pattern (W x D) | 71.5 x 71.5 mm |
| Ports & interfaces | |
| Fan connector | 4-pin |
| Power | |
| Voltage | 12 V |
| Colour | |
|---|---|
| Product colour | Black |
| Weight & dimensions | |
| Package depth | 26 mm |
| Package width | 82.5 mm |
| Package height | 82.5 mm |
| Width | 80 mm |
| Package weight | 99 g |
| Depth | 25 mm |
| Height | 80 mm |
| Weight | 81 g |
| Cable length | 0.4 m |
| Packaging data | |
| Package depth | 26 mm |
| Package width | 82.5 mm |
| Package height | 82.5 mm |
| Package weight | 99 g |
| Package type | Box |
| Packaging content | |
| Screws included | Yes |
| Number of screws | 4 |
| Package type | Box |
| Manual | Yes |
| Other features | |
| Mounting hole pattern (W x D) | 71.5 x 71.5 mm |
| Country of origin | China |
You may also be interested in
| Product |
Bestseller
ARCTIC P8 PWM PST - Pressure-optimised...
Login for pricing
|
Hot Product
StarTech.com 60x10mm Replacement Ball...
Login for pricing
|
Recommended
StarTech.com Replacement 70mm TX3 Dual...
Login for pricing
|
HPE 777290-001 computer cooling system...
Login for pricing
|
Popular
StarTech.com 50x10mm Replacement Ball...
Login for pricing
|
StarTech.com 80x25mm Dual Ball Bearing...
Login for pricing
|
|---|---|---|---|---|---|---|
| SKU |
ACFAN00150A
|
FAN6X1TX3
|
FAN7X10TX3
|
777290-001
|
FAN5X1TX3
|
FANBOX
|
| Description |
Not only that we at ARCTIC free the IT world from noise – we care for the right sound as well!
As an international company, our expertise extends over noise reduction in PCs to consumer electronics products. |
Add additional chassis cooling with a 60mm ball bearing fan
This versatile 60mm fan is an ideal replacement fan for keeping your computer running cool. The fan can be powered through a TX3 connection, and features a dual ball bearing design that ensures reliable cooling and longer fan lifespan. The fan can be used to replace the fan component of some CPU coolers or mounted to the side panel of a computer case and features a tachometer pin on the TX3 motherboard connector that provides the host system with fan operating status information. The StarTech.com Advantage - A dual ball bearing design ensures reliability and longer life - Comes ready for either 3-pin motherboard fan headers or LP4 Molex power supplies - Backed by a StarTech.com 2-year warranty and free lifetime technical support |
Keep a system running cooler with a 70mm ball bearing case fan
This 70mm TX3 Dual Ball Bearing CPU Cooler Fan is a cost-effective replacement fan for standard CPUs as well as many different types of 1U or low profile CPU coolers that use a 70mm fan. For peace of mind, the CPU cooling fan features a Tachometer pin on the TX3 motherboard connector that provides the host system with fan operating status, while a dual ball bearing design helps provide smooth operation and longer (fan) lifespan. The StarTech.com Advantage - A dual ball bearing design ensures reliability and longer life - Backed by a StarTech.com 2-year warranty and free lifetime technical support |
For use with processors less than or equal to 105W.
|
Add additional chassis cooling with a 50mm ball bearing fan
This versatile 5cm x 1cm fan is an ideal replacement fan for keeping your computer running cool. The fan can be powered through a TX3 connection, and features a dual ball bearing design that ensures reliable cooling and longer fan lifespan. The StarTech.com Advantage - Exhausts hot air out of a PC, increasing dependability and extending component lifetime - Cools your PC, increasing dependability and extending component lifetime - Comes complete with a TX3 to LP4 adapter |
Add additional chassis cooling with a 80mm ball bearing fan
This versatile PC case fan is designed to fit a broad range of computer case designs, to circulate cool air into the case, or exhaust warm air out - preventing problems due to overheating components. A quiet cooling solution, the near silent 8cm fan features a brushless ball bearing design coupled with a high-efficiency blade layout, capable of moving 37 CFM of air. This broadly compatible PC cooling solution can be powered through a simple LP4 connection to the computer power supply. The StarTech.com Advantage - A dual ball bearing design ensures reliability and longer life - Backed by a StarTech.com 2-year warranty and free lifetime technical support |
| Short Description |
80 x 25 mm, 200 - 3000 RPM, 23.4 CFM, 40.3 m³/h, 0.3 Sone, 12V DC, 81 g
|
StarTech.com 60x10mm Replacement Ball Bearing Computer Case Fan w/ TX3 Connector - 3 pin case Fan - TX3 Fan - 60mm Fan
|
StarTech.com Replacement 70mm TX3 Dual Ball Bearing CPU Cooler Fan - 3 pin case Fan - TX3 Fan - 70mm Fan
|
Standard efficiency heatsink assembly
|
StarTech.com 50x10mm Replacement Ball Bearing Computer Case Fan TX3/LP4 Connector - 3 pin case Fan - TX3 Fan - 50mm Fan
|
StarTech.com 80x25mm Dual Ball Bearing Computer Case Fan w/ LP4 Connector - computer case Fan - 80mm Fan - pc Fan
|
| Manufacturer |
ARCTIC
|
StarTech.com
|
StarTech.com
|
HPE
|
StarTech.com
|
StarTech.com
|