We use cookies to make your experience better.
To comply with the new e-Privacy directive, you agree to the privacy policy and our use of cookies.
DrayTek ANT-4GE1-K network antenna Omni-directional antenna N-type 6 dBi
SKU
ANT-4GE1-K
- Omnidirectional Outdoor Aerial
- 4-6 dBi Signal Gain
- Can also be used Indoors
- Improves signal stability and reception
- Suitable for all DrayTek LTE routers
- Wall or Pole mountable (includes fittings)
- 4G, 3G, 2G & LTE Compatible (See band support)
- N-Plug Connector
- Requires N-to-SMA cable (sold separately)
Category: Network Antennas
| Antenna gain level (max) | 6 dBi |
|---|---|
| SKU | ANT-4GE1-K |
| EAN | 0714735999231 |
| Manufacturer | Draytek |
| Availability | Y |
Outdoor 4G Antenna for DrayTek LTE Routers
4G/LTE routers such as the DrayTek Vigor 2862Lac can provide highly resilient connectivity by utilising mobile broadband, either as the main Internet connection or as a backup connection for the building.
The Outdoor 4G Antennas for DrayTek LTE Routers can improve 4G, 3G & LTE signal reception for any DrayTek Vigor LTE router, expanding coverage and improving speeds, by allowing you to locate the antenna in a location which receives a strong signal.
Installation of outdoor antennas enables or improves 4G/LTE connectivity into locations where it’s typically inaccessible. For instance, in a comms cabinet, or in parts of a building that otherwise cannot receive mobile signal, due to building layout or location. Simply placing the antennas physically outdoors normally provides a significant signal boost over what can be achieved within a building, potentially improving speeds through better access to LTE bands and nearby mobile cell towers. The antennae can also be installed inside a building, perhaps just run outside the location/room which has poor coverage.
The Outdoor 4G Antennas for DrayTek LTE Routers support all currently used 4G, 3G and 2G frequency bands from 700MHz to 2.7GHz.
The antennas are Omni-Directional, designed for vertical orientation to receive signal from any nearby mobile cell tower, without requiring careful or sensitive aiming during installation.
Install a pair of Outdoor 4G Antennas around 0.5m to 1m apart to enable the MIMO (Multiple In, Multiple Out) capability of 4G & LTE wireless networks, further improving speeds and connection resilience. For best results, separate the antennas horizontally in built-up areas and vertically in open areas.
The Outdoor 4G Antennas for DrayTek LTE Routers are weatherproof and ideal for permanent outdoor installation either on a pole or wall. Fixings are provided suitable for either (poles not included).
The N-type connector on each antenna provides a secure and weather resistant antenna connection, which links to the router’s SMA antenna connectors with a suitable cable. Each Outdoor 4G Antenna requires an N-plug to SMA cable for installation, such as our own 5 metre cable (model: CAB-LTEA5, supplied separately). You can use your own shorter or longer cables instead, ensuring the right connectors and always keep cable lengths to a minimum to avoid unncessary signal loss.
4G/LTE routers such as the DrayTek Vigor 2862Lac can provide highly resilient connectivity by utilising mobile broadband, either as the main Internet connection or as a backup connection for the building.
The Outdoor 4G Antennas for DrayTek LTE Routers can improve 4G, 3G & LTE signal reception for any DrayTek Vigor LTE router, expanding coverage and improving speeds, by allowing you to locate the antenna in a location which receives a strong signal.
Installation of outdoor antennas enables or improves 4G/LTE connectivity into locations where it’s typically inaccessible. For instance, in a comms cabinet, or in parts of a building that otherwise cannot receive mobile signal, due to building layout or location. Simply placing the antennas physically outdoors normally provides a significant signal boost over what can be achieved within a building, potentially improving speeds through better access to LTE bands and nearby mobile cell towers. The antennae can also be installed inside a building, perhaps just run outside the location/room which has poor coverage.
The Outdoor 4G Antennas for DrayTek LTE Routers support all currently used 4G, 3G and 2G frequency bands from 700MHz to 2.7GHz.
The antennas are Omni-Directional, designed for vertical orientation to receive signal from any nearby mobile cell tower, without requiring careful or sensitive aiming during installation.
Install a pair of Outdoor 4G Antennas around 0.5m to 1m apart to enable the MIMO (Multiple In, Multiple Out) capability of 4G & LTE wireless networks, further improving speeds and connection resilience. For best results, separate the antennas horizontally in built-up areas and vertically in open areas.
The Outdoor 4G Antennas for DrayTek LTE Routers are weatherproof and ideal for permanent outdoor installation either on a pole or wall. Fixings are provided suitable for either (poles not included).
The N-type connector on each antenna provides a secure and weather resistant antenna connection, which links to the router’s SMA antenna connectors with a suitable cable. Each Outdoor 4G Antenna requires an N-plug to SMA cable for installation, such as our own 5 metre cable (model: CAB-LTEA5, supplied separately). You can use your own shorter or longer cables instead, ensuring the right connectors and always keep cable lengths to a minimum to avoid unncessary signal loss.
| Performance | |
|---|---|
| Bandwidth note | 800, 1800, 2600, 900, 2100, 700, 3400 MHz |
| Antenna gain level (max) | 6 dBi |
| Vertical beam width | 25° |
| Impedance | 50 Ω |
| Horizontal beam width | 360° |
| Gain | 4 / 6 dBi |
| Features | |
| Housing material | Acrylonitrile butadiene styrene (ABS), Zinc |
| Connector gender | Female |
| Antenna gain level (max) | 6 dBi |
| Antenna type | Omni-directional antenna |
| Voltage Standing Wave Ratio (VSWR) | 1.5 |
| Vertical beam width | 25° |
| Polarization | Vertical polarization |
| Impedance | 50 Ω |
| Horizontal beam width | 360° |
| Gain | 4 / 6 dBi |
| Product colour | Stainless steel, White |
| Antenna connector type | N-type |
| Technical details | |
| Antenna gain level (max) | 6 dBi |
| Antenna type | Omni-directional antenna |
| Voltage Standing Wave Ratio (VSWR) | 1.5 |
| Vertical beam width | 25° |
| Polarization | Vertical polarization |
| Impedance | 50 Ω |
| Horizontal beam width | 360° |
| Gain | 4 / 6 dBi |
| Antenna connector type | N-type |
| Harmonized System (HS) code | 85177100 |
| Colour | |
| Product colour | Stainless steel, White |
| Operational conditions | |
|---|---|
| Operating temperature (T-T) | -40 - 80 °C |
| Weight & dimensions | |
| Weight | 500 g |
| Height | 32 mm |
| Diameter | 7 mm |
| Packaging content | |
| Quantity per pack | 1 pc(s) |
| Logistics data | |
| Quantity per pack | 1 pc(s) |
| Harmonized System (HS) code | 85177100 |
You may also be interested in
| Product |
DrayTek ANT-4GE1-K network antenna Omn...
Login for pricing
|
Ubiquiti Networks RAD-2RD network ante...
Login for pricing
|
Panasonic PCPE-PAN4318 network antenna
Login for pricing
|
Ubiquiti Panel Antenna Ultra network a...
Login for pricing
|
Zyxel ANT2105-ZZ0201F network antenna...
Login for pricing
|
|---|---|---|---|---|---|
| SKU |
ANT-4GE1-K
|
RAD-2RD
|
PCPE-PAN4318
|
UACC-UK-ULTRA-PANEL-ANTENNA
|
ANT2105-ZZ0201F
|
| Description |
Outdoor 4G Antenna for DrayTek LTE Routers
4G/LTE routers such as the DrayTek Vigor 2862Lac can provide highly resilient connectivity by utilising mobile broadband, either as the main Internet connection or as a backup connection for the building. The Outdoor 4G Antennas for DrayTek LTE Routers can improve 4G, 3G & LTE signal reception for any DrayTek Vigor LTE router, expanding coverage and improving speeds, by allowing you to locate the antenna in a location which receives a strong signal. Installation of outdoor antennas enables or improves 4G/LTE connectivity into locations where it’s typically inaccessible. For instance, in a comms cabinet, or in parts of a building that otherwise cannot receive mobile signal, due to building layout or location. Simply placing the antennas physically outdoors normally provides a significant signal boost over what can be achieved within a building, potentially improving speeds through better access to LTE bands and nearby mobile cell towers. The antennae can also be installed inside a building, perhaps just run outside the location/room which has poor coverage. The Outdoor 4G Antennas for DrayTek LTE Routers support all currently used 4G, 3G and 2G frequency bands from 700MHz to 2.7GHz. The antennas are Omni-Directional, designed for vertical orientation to receive signal from any nearby mobile cell tower, without requiring careful or sensitive aiming during installation. Install a pair of Outdoor 4G Antennas around 0.5m to 1m apart to enable the MIMO (Multiple In, Multiple Out) capability of 4G & LTE wireless networks, further improving speeds and connection resilience. For best results, separate the antennas horizontally in built-up areas and vertically in open areas. The Outdoor 4G Antennas for DrayTek LTE Routers are weatherproof and ideal for permanent outdoor installation either on a pole or wall. Fixings are provided suitable for either (poles not included). The N-type connector on each antenna provides a secure and weather resistant antenna connection, which links to the router’s SMA antenna connectors with a suitable cable. Each Outdoor 4G Antenna requires an N-plug to SMA cable for installation, such as our own 5 metre cable (model: CAB-LTEA5, supplied separately). You can use your own shorter or longer cables instead, ensuring the right connectors and always keep cable lengths to a minimum to avoid unncessary signal loss. |
- Greatly Reduce Wind Load - Protect Antenna Surfaces from Harsh Environments - Conceal Antenna Equipment from Public view - Designed specifically for RocketDish Antennas
|
Durable, discreet and available with multiple inputs and outputs, our antennas keep you connected. Link directly to your dock for perfect performance even in extreme conditions.
|
Sleek, clip-on external antenna for the Swiss Army Knife Ultra that provides 90-degree directional, extended range coverage.
|
Build a Wholesome WLAN Infrastructure with ZyXEL Selected Accessories - Compatible with ZyXEL WLAN devices to get optimal signal quality - Matching colors and exterior looks - Multiple options to meet your current network environments When building a wireless LAN infrastructure, the IT staff should consider several factors influencing transmission efficiency, such as different facility sizes, building materials and interior divisions. To address this concern, a comprehensive WLAN solution for wireless LAN deployments can be critical. To facilitate the installation process, ZyXEL offers a complete range of 2.4 GHz and 5 GHz antennas, cables and other accessories for Access Points (APs) to enable customized wireless deployments for almost any installation types. The ZyXEL antennas are available in various space, directionality, gain and range capabilities in different form factors. With appropriately coupled antennas and APs, businesses will enjoy prefect WLAN environments with superior coverage, better reliability and higher data rates in all kinds of facilities. In addition, the ZyXEL low-loss cables can be used to extend the distance between any ZyXEL 2.4 GHz and 5 GHz AP and the antenna through N-plug or RP-SMA connectors.
|
| Short Description |
Gain (dBi) 4 - 6, VSWR 1.5, N-Female, 50ohm
|
RocketDish Radome RAD-2RD - 2 ft / 648 mm, cover f/ RocketDish RD-2G-24, RD-3G-26, RD-5G-30, RD-5G-34
|
Low Frequency wifi antenna (2.4 Ghz)
|
10 dBi, 15 dBi, 75 N at 200 km/h, 138 x 207 x 43 mm, 450 g
|
ANT2105 Dual Pack - Dual Band Radio
|
| Manufacturer |
Draytek
|
Ubiquiti
|
Panasonic
|
Ubiquiti
|
Zyxel
|