Ubiquiti PBE-M5-300 network antenna Sector antenna 22 dBi

AN620-SCL71130EU

AF-5G23-S45

RD-5G30-LW

AF-MPx8

HORN-5-60

Sleek, rectangular circularly polarized antenna.

Suitable for use in Indoor environments: wall mount, doorways, under counter, above counter as an RFID pad, on shelves, on end-cap displays, POS etc.

- Integrated Mounting Holes.
- Comes with mounting hardware for flat panel mounting.
- Comes with 1ft of pigtail cable, compatible to Motorola standard antenna cables for extension.

The airFiber X antennas are purpose-built with 45° slant polarity for seamless integration with the AF-5X.

Innovative Industrial Design Weighing in at only 7.4 kg, the RocketDish LW is engineered with ruggedized yet lightweight components to withstand harsh outdoor conditions. Plug and Play Integration The RocketDish LW has a built-in Rocket™ mount, so no tools are needed to install the Rocket BaseStation. Optional Isolator Radome The IsoBeam™ enhances isolation performance for co-location and features an integrated protective radome. Optional Alignment Accessory The Precision Alignment Kit enables extremely accurate aiming for optimal link performance.

Scalable airFiber® MIMO Multiplexer

Combine multiple airFiber X radios on a single dish antenna for superior noise immunity performance, redundancy, and multi-Gigabit Point-to-Point (PtP) throughput.

Precise GPS Synchronization

Using a common GPS timing reference, the airFiber X radios work cohesively to deliver powerful, multi-Gigabit bridging performance for PtP links.

4x4 or 8x8 MIMO Backhaul Technology

Quickly mount multiple airFiber X radios on existing airFiber dish antennas for Plug and Play installation. You can use radio channels of different sizes – even adjacent channels with no guard band – and place them anywhere within the radio band.

Mounting Versatility

The airFiber NxN Multiplexer can be attached to most 5 GHz airFiber X or RocketDish™ antenna models. For any other antenna configuration, you can mount the airFiber NxN Multiplexer on a pole.

Mounting Versatility

The airFiber NxN Multiplexer can be attached to most 5 GHz airFiber X or RocketDish™ antenna models. For any other antenna configuration, you can mount the airFiber NxN Multiplexer on a pole.

Reduced Tower Costs

Mounting multiple airFiber X radios on a single dish antenna maximizes throughput and capacity in a clean, compact tower footprint, minimizing tower costs.

True Redundancy

Multiple airFiber X radios with multiple carriers on multiple frequency bands provide the ultimate noise immunity and link redundancy performance.

Paired with the EdgePoint for Superior Performance

The EdgePoint™ provides powerful configuration features, including radio-link load balancing and advanced reliability for optical fiber deployments.

5 GHz Beamwidth Horn Antenna
With a range of different beam widths, the isolation antennas are interchangeable and feature high-performance beam patterns ideal for a range of deployment needs. Used with the airFiber® LTU and airMAX® radios, these antennas deliver superb co‐location performance without sacrificing gain.

Modular Design
The isolation antennas are interchangeable and feature high-performance beam patterns for a range of demanding deployment needs. Combined with the PrismStation 5AC or airFiber LTU radio, the system gets maximum gain out of the smallest footprint.

Asymmetrical horn antennas
60° and 90° versions have naturally attenuated side lobes and extremely low back radiation. They offer the best front-to-back ratio in the industry and the lowest side lobe radiation. Asymmetrical horn antennas are ideal for cluster sector installations with high co-location requirements.

Ultra-low Profile Flat Panel Aesthetic Antenna, 864-868 / 902-928MHz, N Connector (Female), 4.0dBiL, 1.4 : 1 VSWR, LHCP, IP-65

5 GHz, 23 dBi, 378mm diameter

5GHz, 30dBi

8x8, 100 mbit/s, GPS, 5 GHz, airFiber X, PtP

5.15 ‑ 5.85 GHz, 16 dBi, Dual-Linear, 60 / 60°, 720 g

Zebra

Ubiquiti

Ubiquiti

Ubiquiti

Ubiquiti