Lindy 350m Fibre Optic USB 3.0 Extender

42702

43312

43363

POR-1100

POT-0110

The Lindy 200m Fibre Optic USB 2.0 Extender supports far longer distances than standard copper cables. It is a compact two part hardware solution comprising of a transmitter dongle that connects directly to your computer and receiver dongle that connects to the USB peripheral. These are then joined together using LC Multimode Simplex Fibre.The small form factor of the Extender allows for an easy and discreet installation while the use of fibre helps rule out the possibility of electrical interference in the extended signal.

Ideal for remote desktop links, industrial control, surveillance and external storage applications the extender gives long distance access to USB keyboards and mice, printers, scanners, webcams, audio devices, disc burners, external drive storage and much more.

Connecting a USB hub to the receiver also gives additional access to a larger number of USB devices.

For added convenience the Fibre Optic USB 2.0 Extender is supplied with a power supply, which can be connected should additional power be required.

Fibre Optic USB extenders allow USB signals to be extended far beyond the limits of traditional copper cable solutions. The Lindy 100m Fibre Optic USB 3.2 Type C Extender supports SuperSpeed transfer rates of up to 10Gbps. This Extender is a complete and compact two-part hardware solution comprising of a transmitter that connects directly to the user's computer and receiver that connects to the USB peripheral, using andldquo;off the shelfandrdquo; LC duplex fibre cabling.

The extender is ideal for long distance use with remote desktop links, industrial control systems, surveillance control rooms and external storage applications. This device is fully compatible with, and can be used to extend signals from, 4K USB webcams and video conferencing systems. Utilising fibre optic transmission, this extender provides high resistance to EMI and RFI, perfect for use in andldquo;noisyandrdquo; areas such as hospitals, large retail installations or industrial buildings. The Fibre Optic USB 3.2 Type C Extender is supplied with a USB Type A to Micro-B cable which can be attached to a second USB port or to a USB Power supply (not included) should additional power be required.

Please note that DisplayPort Alternate Mode is not supported.

Please note: This Extender is not backwards compatible with USB 2.0.

Information about USB 3.0, 3.1 and 3.2

USB 3.0, USB 3.1 and USB 3.2 PCs, cables and devices are all compatible with each other, when using either a USB Type A or USB Type C host interface.USB 3.0, USB 3.1 Gen 1 and USB 3.2 Gen 1 all support data transfer rates up to 5 Gbps.USB 3.1 Gen 2 and USB 3.2 Gen 2 both support data transfer rates up to 10 Gbps.

Fibre Optic USB extenders allow USB signals to be extended far beyond the limits of traditional copper cable solutions. The Lindy 300m 2 Port Fibre Optic USB 3.0 Extender supports SuperSpeed transfer rates of up to 5Gbps. This Extender is a complete two-part hardware solution comprising of a transmitter that connects directly to the user's computer and a receiver that connects to two USB peripherals using “off the shelf” LC duplex fibre cabling.

The extender is ideal for long distance use with remote desktop links industrial control systems surveillance control or meeting/conference rooms and external storage applications. This device is fully compatible with webcams and video conferencing systems that support 4K USB 3.2/3.1/3.0 and USB 2.0. Off the shelf LC duplex fibre cabling gives a greater level of flexibility to choose the cable length to fit the requirements of the installation. Utilising fibre optic transmission this extender provides high resistance to EMI and RFI perfect for use in “noisy” areas such as hospitals large retail installations or industrial buildings.

Please note: This Extender is backwards compatible with USB 2.0 devices.

Information about USB 3.0 3.1 & 3.2

USB 3.0 USB 3.1 and USB 3.2 PCs cables and devices are all compatible with each other when using either a USB Type A or USB Type C host interface.

USB 3.0 USB 3.1 Gen 1 and USB 3.2 Gen 1 all support data transfer rates up to 5 Gbps.

USB 3.1 Gen 2 and USB 3.2 Gen 2 both support data transfer rates up to 10 Gbps.

• Extends USB 3.0 connections for two USB devices (Type A and Type C) up to 300m
• Supports data transfer rates up to 5Gbps backwards compatible with USB 2.0 devices
• Uses standard “off the shelf” LC duplex fibre cabling
• Resistant to RF & EM Interference for use in highly sensitive areas
• 2 year warranty

The LevelOne POR-1100 is the perfect accessory to increase your Power over Ethernet network performance. Normal ethernet cable runs only reach 100 meters, but with POR-1100 installers can extend the PoE network performance up to 200 meters! Simple yet durable, no software required. As a PoE Repeater, POR-1100 receives all power from the Power Sending Equipment (PSE), for example, a PoE switch. This means that POR-1100 uses no external power supply, making it the most flexible option for system integrators looking for an easy, affordable solution to increase the distance to the attached devices. The POR-1100 is the perfect solution for taking Ethernet to areas such as roof tops, factory floors, airports manufacturing plants, and large warehouses.

The POT system, one master & one slave units, provide a long-reach Ethernet extension with remote Powerover-Ethernet (PoE) capability over a 2-wire line. Connection with a Class 0 PD device, the distance of two-wire 24AWG cables can be up to 400 meters when using a 48Watt high power PoE Switch, FSW-0513/0543. Users may select a fixed data rate for different copper line ranging. The maximum data rate can be up to 60 Mbps full duplex for 2-wire line.

The POT master unit is powered by the local PoE Ethernet network, and transmits both the data and power to the remote slave unit over 2-wire cable. The remote unit regenerates the power and provides the PoE capability to power up the remote PD device up to 15 watts when connecting to 48Watt High Power Switch, FSW-0513. The POT M/S supports the indoor & outdoor models with wall-mount feature.

Equipped with dip switches, the 2-wire line speed can be configured to meet different line gauges and distances. A POT pair offers a cost effective solution for remote power applications such as LAN-to-LAN connectivity, Video Streaming, FTTB, and MDU/MTU over single twisted line.

- Two-wire cables are used to connect 100Mbps Fast Ethernet PoE devices
- Maximum distance up to 400 meters for 24 AWG cable
- Maximum data rate up to 60 Mbps full duplex
- Remote PoE capability for PD devices of WiFi AP, IP camera, IP telephones
- Up to 15 Watts for remote PoE, Depending on PSE power
- Easy installation by indoor & outdoor different models
- Dip Switches for 2-wire line rate settings
- Auto MDIX for 10/100 Base T Ethernet LAN Ports
- Low-Latency for Video/Voice/Data applications

200m Fibre Optic USB 2.0 Extender

100m Fibre Optic USB 3.2 Type C Extender

300m 2 Port Fibre Optic USB 3.0 Extender

Outdoor PoE Repeater, Cascadable,

PoE Extender, Receiver, Over 2-wire, 48V, 60/60 Mbps

Lindy

Lindy

Lindy

LevelOne

LevelOne